Guide
How much power do empty desks waste?
An empty desk still uses electricity. Screens on standby, docking stations, chargers and lamps quietly draw power through nights, weekends and the days nobody books that desk.
Where the power goes
| Device at an empty desk | Typical idle draw |
|---|---|
| Two monitors on standby | 1–2 W |
| Docking station or USB-C hub | 3–6 W |
| Chargers and adaptors left plugged in | 0.5–2 W |
| Task lamp, fan or heater left on | 0–10 W+ |
Together, around 10 W per desk is a reasonable planning figure. Desks where screens or lamps are left fully on use far more.
Why it adds up
A year has 8,760 hours. Even in a well-used hybrid office, a desk is occupied for only around 1,500 of them. That leaves more than 7,000 hours where nothing useful is happening at the desk.
At 10 W for about 7,200 empty hours, each desk wastes around 70 kWh a year.
Across a whole office
| Desks | Energy wasted per year | At $0.30 per kWh | Emissions (about 0.7 kg CO₂e per kWh) |
|---|---|---|---|
| 100 | 7,000 kWh | $2,100 | 4.9 t CO₂e |
| 250 | 17,500 kWh | $5,250 | 12.3 t CO₂e |
| 1,000 | 70,000 kWh | $21,000 | 49 t CO₂e |
How desk power management works
A small power module connects to the desk's existing power, such as CMS Electracom or OE Elsafe tag leads. When someone checks in, power comes on. When they check out or the booking ends, it switches off. People don't need to remember anything.
More than the energy bill
- Sustainability reporting: measured energy per desk, floor and site, ready for your ESG reports.
- Safety: heaters and chargers aren't left running overnight.
- Longer equipment life: devices aren't powered around the clock.
Idle power varies with equipment. Emissions use about 0.7 kg CO₂e per kWh as a typical east-coast Australian grid average. Check your state's current factor in the National Greenhouse Accounts Factors for formal reporting.
Try it with your own numbers
Use our savings calculator, or book a 30-minute demo and we'll model your office with you.